Shire Walsoken 12x8 19mm Log Cabin

The 12 x 8 Walsoken Log Cabin from Shire offers not only a contemporary log cabin perfect for use as a workshop, hobby room, office, teenagers den or dining space, but it also doubles up as a garden shed as it features a handy storage area, which is separated from the main log cabin space by an internal wall and features a separate single external door for easy access. The storage section can be placed on either side of the main cabin space, so that you can choose the perfect configuration for you. The main cabin area is a spacious 7ft 1/2" x 7ft 1/2" and the storage space is 3ft 11in x 7ft 1/2", making it great for storing your garden tools. Made from 19mm interlocking logs which are 50% thicker than a standard shed and 12mm tongue and groove boards for the roof and floor, this is a sturdy log cabin that is built with durability in mind. This log cabin also benefits from fully framed lockable doors (locks included), for added safety the doors and window panels are made from Styrene Acrylonitrile safety glazing which is UV stable and safe to handle. This cabin is also supplied with pressure treated bearers that can be installed directly onto paving slabs or a concrete base.

Made in the UK from kiln dried FSC European Pine which reduces the moisture content in the timber and allows for tight and secure interlocking joints.

The cabin is supplied as a self assembly kit, with instructions and fittings. The log cabin is supplied with individual interlocking logs that slot together for straightforward assembly. If you would prefer to leave all the hard work to the experts at Shire, then opt for the home delivery and construction package. All Shire log cabins are designed to be easily dismantled should you move home and want to take your cabin with you.

19mm interlocking logs

Single opening window

Lockable double doors to cabin space

Separate single Lockable door to storage space

Pent roof to allow rainwater to run away from doors

Supplied with keylocks

Supplied untreated so that you may paint or stain any colour you wish

Made in the UK from FSC approved Northern European Pine

Dimensions

Height

215cm (7ft 0.5in) sloping to 189cm (6ft 2.5in)

Width

363cm (11ft 11in)

Depth

259cm (8ft 6in)

Footprint

W 359cm x D 239cm (11ft 9.5in x 7ft 10in)

Main Cabin Internal Measurements

W 214cm x D 215cm (7ft 0.5in x 7ft 0.5in)

Storage Area Internal Measurements

W 119cm x D 215cm (3ft 11in x 7ft 0.5in)

Internal Height

203cm (6ft 8in) sloping to 181cm (5ft 11in)

Specification

Timber FSC Pine

Log Thickness19mm Interlocking Logs

Floor Thickness

12mm Tongue & Groove Boards

Roof Thickness 12mm Tongue & Groove Boards

Roof Covering

Mineral Felt

Roof Joists

44mm x 70mm

Floor Bearers

34mm x 62mm

Glazing

Styrene Acrylonitrile Safety Glazing

Treatment and Maintenance

Shire Log Cabins should be treated immediately following assembly with a high quality preservative and at least once a year after. It is also recommended that the underside of the floorboards are treated before assembly for added protection.

Following your order, you will be sent a link to choose your delivery day. On the morning of delivery day you will also receive tracking information.

The item is flat packed and delivered kerbside.

Please contact us prior to ordering with your postcode as surcharges may apply.

Internal Dimensions (mm) -
2152 W x 2143 D
Ridge Height 2028 mm
Eaves Height 1808 mm

External Dimensions (mm) -
2390 W x 3290 D
Ridge Height 2150 mm
Eaves Height 1890 mm

With Overhang (mm) -
2590 W x 3630 D

Door Opening - 1360 & 676 x 1705 mm
Window Opening - 634 W x 1620 H

Weight - 383kg

MAINTENANCE
Your timber building will need to be treated prior to assembly (except log cabins which should be treated following assembly) and at least annually thereafter, but as instructed by the manufacturer of the treatment used. We would recommend that your building is treated prior to assembly and again within 3 months of assembly.

TREATMENTS
Almost all buildings need to be treated to protect the timber from the elements, mould and insects. This can either be a solution applied to the surface of the timber or the timber can be pressure treated.

Treatment applied to the surface of the timber will need to be retreated annually to protect the timber. Pressure treated timber doesn’t need to be retreated to protect the timber but you may decide to treat anyway for aesthetic reasons as pressure treated timber will turn grey over time.

Shire recommend that floor joists are not in contact with the ground. This can be achieved by using a damp proof layer between the base and the joist or alternatively construct a base from pressure treated timbers so that the floor of the building lays across.

Care should be taken to ensure floor joists are treated properly.

Shire do not recommend the use of Pressure Treated tongue & groove cladding as this has a tendency of excessive shrinkage as the impregnated timbers dry. Shire Log Cabins are not treated as treatment prior to construction causes the timber to expand resulting in the boarding not fitting together properly. The floor joists are, however, pressure treated.

Most buildings will need to be treated prior to construction in a good quality preservative. Shire also offer a ‘top coat’ option to save you the job (not available for Log Cabins). On top of the base coat we apply a layer of good quality wood preservative in honey brown.

WHAT TO BUILD ON
The base onto which the building is to be placed must be absolutely firm and level. If it isn’t the doors and windows will warp and not open or close as they should. Also an uneven or base that is not level will put strain on panels that could lead to long term damage.

There are several options you may consider to create a firm, level base – concrete or paving slabs. Pressure treated bearers may be laid on top of the constructed base to lift the building away from surface water, although pressure treated bearers are not suitable for large buildings.

Alternatively, adjustable bases are available for some building sizes which level out a slight slope and keep the floor joists away from standing water. This method is suitable for use on firm soil or lawns.

Whichever method you decide upon you should leave a minimum of 18” or 450 mm all around for access whilst assembly the building and maintenance work. You should also remove any overhead obstructions that could interfere with the assembly of the building or damage it during use. If using bearers, ensure that they run in the opposite direction to the floor joists in the building.

Shipping 

Delivery Charges

We offer free shipping on most of our products to the majority of mainland UK postcodes, however this may change depending on the item and the courier that we use. Any delivery charges will be calculated automatically at the checkout. 

Some items may not be available to offshore postcodes. 

If you are ordering a Shire or some Palram-Canopia items, please note that these will be delivered straight from the manufacturer and delivery times may vary. 

Larger items such as furniture sets and pergolas can take up to 7 working days to be delivered. A member of staff will be in touch to advise on your delivery.

Some of these larger items, such as furniture sets, will be delivered kerbside on a pallet. If you cannot accept a pallet delivery, please contact us prior to ordering.

Please call us on 01253 836594 if you are unsure on the charges or delivery timescales.

Please note when ordering: No collections take place on Bank Holidays or weekends. This will also affect any delivery upgrades. 

Returns Policy

Changed your mind?

We are sure that you will be happy with your purchase, however if you change your mind then you can return unwanted items 30 days after purchase. Items must be unused and in original condition, with all packaging, tags and labels intact.

As we choose to keep our prices as low as possible with free postage, this means that we cannot offer free returns. If you are returning an item due to changing your mind, you can either arrange a return yourself and provide us with the relevant tracking details, or if you wish for us to arrange a collection for you, we can book this for you and a collection charge will be deducted from the refund. Collection charges start from £12.00 depending on the size and weight of the item, and the courier we will need to use for this.

Once the goods arrive back in our warehouse, this will be checked over. Your refund will then be processed within 7 days of reaching our warehouse using the same method that you paid with. 

Returning a faulty or damaged product?

On occasion, we do experience faults to our items either during transit or manufacturing flaws. 

We please request that you inform us of this as soon as possible so we can help rectify the problem. We will likely ask you for either a photo or video of the problem so we can resolve this as quick as possible for you.

Our customer service team will assist you with resolving or collecting the item. 

Once the goods arrive back in our warehouse, this will be checked over. Your refund will then be processed within 7 days of reaching our warehouse using the same method that you paid with.